V8 Bike Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,598 Posts
Discussion Starter · #1 ·
GRRR...I torqued the intake manifold bolts down to the recommended 35 ft/lbs. and the rear right stud on the front turned and won't take the torque. Must have stripped the AFR head threads. will have to Heliocoil I guess. Can't leave well enough alone but that is my life's story!. This complete teardown and reassembly isn't easy unless you are Jeff, Geez, Neil or the other master mechanics here but I'll get it done...Joe
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top