V8 Bike Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
I feel stupid for asking, but it's been so long since I took off my rear brake line that I don't remember exactly how it should be routed on my '97 Boss.

On the flexible part of the line near the rear brake is a strain/relief attachment tab that will slide along the line. Where is this attached?

Also, when looking at the rear master cylinder from the front of the bike,
what is the "o'clock" position of the bottom of the U-bend in the rigid part of the brake line where it attaches to the master cylinder.

Any help would be appreciated.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top