MANUAL AND PART NUMBERS

Parts list

Bill,
From a previous post, this is a link to the chevy parts list for our engine....Ray

www.gmgoodwrench.com/crate_eng/pdf/SB_zzengine.pdf

Does anybody know of an updated post on the chevy parts?

BILL TRIBOU said:

HEY MEN,
CAN ANYONE TELL ME WHERE I MIGHT FIND DETAILED INFO FOR MY ZZ4 . I AM LOOKING FOR ENGINE PART NUMBERS AND INFO ON THE IGNITION. CAN ANYONE TELL ME WHAT IS BOSS HOSS WHAT IS GM AND WHAT IS AFTER MARKET ? THE BOSS HOSS MANUAL IS PRIMATIVE ! AN EXAMPLE OF A QUESTION WOULD BE ARE THE SPARK PLUG WIRES AC DELCO OR SOMETHING BOSS HOSS MAKES ? ARE THEY 8MM ?ARE THEY SUPPRESSOR ? WHO MAKES THE FUEL PUMP ? I HAVE A MILLION QUESTIONS !!!!

Click to expand...

Bill,

The plug wires are Boss Hoss, but you can buy aftermarket kits that will fit. Also, Mountain and Siron market 10mm wires that work nicely. I have the Siron wires and they are excellent.

The fuel pump is an aftermarket electric. If you search for "fuel pumps" here you will see that most have gone to something different on the pre'04 models. I run a Carter 4070 and it has been flawless for 4+ years and I don't have to run a regulator for fuel pressure. Just make sure what ever pump you run does not push over 8# of pressure if you are running a Q-jet.......or you'll need a fuel regulator to lower the pressure. If you check Wags site, it has a couple of different mounting options from some * the guys.

If I'm not mistaken, the ignition setup is GM and pretty generic....again a number of guys have gone to MSD, ACCEL, etc in the quest for more spark.......