V8 Bike Riders Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter · #1 ·
Is there a spacer between the adjuster cover and the adjuster block on the swingarm????
Ray
 

·
Registered
Joined
·
93 Posts
Hi Ray,
I have a 2000 small block. Mine has 2 plates (spacers) under the left hand cover (as your sitting on the bike) and 1 under the right hand side with the rear brake caliper bracket acting as one....Hope this helps
George Williamson
 

·
Registered
Joined
·
69 Posts
Discussion Starter · #3 ·
Thanks, mine are missing...Ray
 

·
Registered
Joined
·
2,679 Posts
Ray, I believe yours is a 2004 as is mine. My bike has 2 on each side, one on top of the other, under the chrome covers. I'm not sure how you could tighten up the adjuster blocks without them. Also I would think you would seriously damage the chrome covers without them. Forgive me if we're talking about two different things here, and if so, disregard everything I just said :?

Bryan
 

·
Registered
Joined
·
69 Posts
Discussion Starter · #5 ·
Bryan,
That's the problem, I had a "bird cherp" on my last ride and the adjuster block bolts were hand tight. I guess the mechanic left those out following the trans rebuild....Ray
 
1 - 5 of 5 Posts
Top